[OpenSPIM] "Stack at this Z plus" SOLVED!!!

[Luke Stuyvenberg]

Hi Edgar,

Thanks for pointing out this bug! The problem turned out to be in the device adapter, actually -- it wasn't storing new velocity values, so the next time the stage moved, it used whatever it had been set to before. (Probably, in your configuration file, the stage velocity is being set to '1'; in my case, the velocities were stuck at 10.) I've uploaded a new version of the device adapter to the OpenSPIM update site; updating Fiji should download it and fix the issue.


Thanks again,
Luke

On 11/12/13, edgar.escobar.nieto at ipt.fraunhofer.de wrote:
> Hi Luke,
> 
> I have tried to set the velocity of the Picard XY Stage-X/Y-Velocity using the Device/Property browser and I set the values to 10, but then when 
> I change the stage position using the SPIM plugin the actual velocity is 1 (if I click Refresh on the Device/Property browser then the values are updated
> to 1). Looks like the plugin set the properties Picard XY Stage-X-Velocity and Picard XY Stage-Y-Velocity to 1. That doesn't happen with the Picard Z Stage-Velocity
> since this property can be set from inside the plugin.
> 
> Kind regards,
> Edgar
> 
> 
> _________________________________________________________________________
> 
> Fraunhofer-Institut für Produktionstechnologie IPT 
> Edgar Escobar Nieto 
> 
> 
> 
> 
> Steinbachstraße 17 
> 52074 Aachen 
> 
> edgar.escobar.nieto at ipt.fraunhofer.de 
> http://www.ipt.fraunhofer.de(http://www.ipt.fraunhofer.de/" target="1"> http://www.ipt.fraunhofer.de 
> _________________________________________________________________________ 
> 
> 
> 
> 
> 
> 
> -----Luke Stuyvenberg <stuyvenberg at wisc.edu> schrieb: ----- An: edgar.escobar.nieto at ipt.fraunhofer.de
> Von: Luke Stuyvenberg <stuyvenberg at wisc.edu>
> Datum: 11.11.2013 23:07
> Kopie: openspim at openspim.org
> Betreff: Re: "Stack at this Z plus" SOLVED!!!
> 
> Hi Edgar,
> 
> On 11/08/13, edgar.escobar.nieto at ipt.fraunhofer.de wrote:
> > I am very glad to tell you that the problem was solved. Now everything works perfectly and no error files
> > are generated.
> I'm thrilled to hear it!
> 
> 
> On 11/08/13, edgar.escobar.nieto at ipt.fraunhofer.de wrote:
> > I only would like to know how can I set the speed for the X and Y motors. I already
> > tried using configuration settings in Micro-Manager adding a Group where I use the Picard XY Stage-X-Velocity
> > and Picard XY Stage-Y-Velocity and set them to 10 but when moving the X and Y stage, the speed is always
> > 1 so I don't know if this is right the way that the speed should be set.
> As far as I know, the appropriate way to set the stage velocity is to click, from Micro-Manager: Tools -> Device/Property Browser, scroll through the list looking for those two properties -- Picard XY Stage-X/Y-Velocity -- and set them as desired. (The mention of groups sounds like you might be specifying them as criteria in a pixel size configuration.) If this isn't working, it may be another localization glitch; please let me know.
> 
> 
> Thanks,
> Luke
> 
> On 11/08/13, edgar.escobar.nieto at ipt.fraunhofer.de wrote:
> > Hi Luke,
> > 
> > I am very glad to tell you that the problem was solved. Now everything works perfectly and no error files
> > are generated. I only would like to know how can I set the speed for the X and Y motors. I already
> > tried using configuration settings in Micro-Manager adding a Group where I use the Picard XY Stage-X-Velocity
> > and Picard XY Stage-Y-Velocity and set them to 10 but when moving the X and Y stage, the speed is always
> > 1 so I don't know if this is right the way that the speed should be set.
> > 
> > Thanks a lot. :-)
> > 
> > Kind regards,
> > Edgar
> > 
> > 
> > _________________________________________________________________________
> > 
> > Fraunhofer-Institut für Produktionstechnologie IPT 
> > Edgar Escobar Nieto 
> > 
> > 
> > 
> > 
> > Steinbachstraße 17 
> > 52074 Aachen 
> > 
> > edgar.escobar.nieto at ipt.fraunhofer.de 
> >