[OpenSPIM] "Stack at this Z plus" SOLVED!!!

[edgar.escobar.nieto at ipt.fraunhofer.de]

Hi Luke,

I have tried to set the velocity of the Picard XY Stage-X/Y-Velocity using the Device/Property browser and I set the values to 10, but then when 
I change the stage position using the SPIM plugin the actual velocity is 1 (if I click Refresh on the Device/Property browser then the values are updated
to 1). Looks like the plugin set the properties Picard XY Stage-X-Velocity and Picard XY Stage-Y-Velocity to 1. That doesn't happen with the Picard Z Stage-Velocity
since this property can be set from inside the plugin.

Kind regards,
Edgar
 _________________________________________________________________________

Fraunhofer-Institut für Produktionstechnologie IPT 
Edgar Escobar Nieto  
 

 
 
Steinbachstraße 17 
52074 Aachen 

edgar.escobar.nieto at ipt.fraunhofer.de 
http://www.ipt.fraunhofer.de
_________________________________________________________________________
 
 
 


-----Luke Stuyvenberg <stuyvenberg at wisc.edu> schrieb: -----
An: edgar.escobar.nieto at ipt.fraunhofer.de
Von: Luke Stuyvenberg <stuyvenberg at wisc.edu>
Datum: 11.11.2013 23:07
Kopie: openspim at openspim.org
Betreff: Re: "Stack at this Z plus" SOLVED!!!

Hi Edgar,

On 11/08/13, edgar.escobar.nieto at ipt.fraunhofer.de wrote:
> I am very glad to tell you that the problem was solved. Now everything works perfectly and no error files
> are generated.
I'm thrilled to hear it!


On 11/08/13, edgar.escobar.nieto at ipt.fraunhofer.de wrote:
> I only would like to know how can I set the speed for the X and Y motors. I already
> tried using configuration settings in Micro-Manager adding a Group where I use the Picard XY Stage-X-Velocity
> and Picard XY Stage-Y-Velocity and set them to 10 but when moving the X and Y stage, the speed is always
> 1 so I don't know if this is right the way that the speed should be set.
As far as I know, the appropriate way to set the stage velocity is to click, from Micro-Manager: Tools -> Device/Property Browser, scroll through the list looking for those two properties -- Picard XY Stage-X/Y-Velocity -- and set them as desired. (The mention of groups sounds like you might be specifying them as criteria in a pixel size configuration.) If this isn't working, it may be another localization glitch; please let me know.


Thanks,
Luke

On 11/08/13, edgar.escobar.nieto at ipt.fraunhofer.de wrote:
> Hi Luke,
> 
> I am very glad to tell you that the problem was solved. Now everything works perfectly and no error files
> are generated. I only would like to know how can I set the speed for the X and Y motors. I already
> tried using configuration settings in Micro-Manager adding a Group where I use the Picard XY Stage-X-Velocity
> and Picard XY Stage-Y-Velocity and set them to 10 but when moving the X and Y stage, the speed is always
> 1 so I don't know if this is right the way that the speed should be set.
> 
> Thanks a lot. :-)
> 
> Kind regards,
> Edgar
> 
> 
> _________________________________________________________________________
> 
> Fraunhofer-Institut für Produktionstechnologie IPT 
> Edgar Escobar Nieto 
> 
> 
> 
> 
> Steinbachstraße 17 
> 52074 Aachen 
> 
> edgar.escobar.nieto at ipt.fraunhofer.de 
> http://www.ipt.fraunhofer.de 
> _________________________________________________________________________
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://openspim.org/pipermail/openspim/attachments/20131112/3037629d/attachment-0002.html>