[OpenSPIM] Manufacturing of parts

[Frédéric BRAU]

Dear Kathleen,

You could ask for anodisation of these self-made parts in aluminium : 
many differents films exists to coat the aluminium in black to prevent 
reflections and protect the aluminium from agressive buffers.

Best regards,

Frédéric Brau


Le 25/01/2017 à 16:58, Kathleen Chen a écrit :
> Hello,
>
> Does anyone have any insight on the best materials to use for 
> manufacturing of the "self-made" parts? We were planning to make 
> manufacture most of the parts out of aluminum but will that cause 
> reflection within the system during acquisition? Additionally, can the 
> sample chamber in the wiki be made of aluminum as well or is acrylic a 
> better option?
>
> Thanks,
> Kathleen Chen
>
>
> _______________________________________________
> OpenSPIM mailing list
> OpenSPIM at openspim.org
> http://openspim.org/mailman/listinfo/openspim

-- 
Frédéric Brau <mailto:%20brau at ipmc.cnrs.fr>
Institut de Pharmacologie Moléculaire et Cellulaire - UMR7275 CNRS/UNS 
<http://www.ipmc.cnrs.fr>
660, Route des Lucioles
06560 VALBONNE
Tel: 33 (0)4 93 95 77 83 Bureau / 77 87 / 77 88 / 77 89 Confocaux
Fax: 33 (0)4 93 95 77 08
Plateforme MICA: Microscopie Imagerie Côte d'Azur <http://mica.unice.fr>
Réseau Technologique de Microscopie de Fluorescence Multidimensionnelle 
<http://rtmfm.cnrs.fr>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://openspim.org/pipermail/openspim/attachments/20170125/be3a1a27/attachment.html>