[OpenSPIM] multiline openSPIM with Lighthub-4

[Fredrik Ek]

Hi Andreas,

The lasers are controlled in micromanager at this point. We have done some initial test with multi laser acquisitions but have not succeeded yet. We are planning to control the laser modules through TTL using NI interface but that will not be tested until later this year.

//Fredrik

Från: Andreas GIROD [mailto:andreas.girod at uni.lu]
Skickat: den 4 juni 2015 12:44
Till: OpenSpim Mailinglist; Fredrik Ek
Kopia: Andreas GIROD
Ämne: Re: [OpenSPIM] multiline openSPIM with Lighthub-4

Hi Fredrik,

are you operating the lighthub with MicroManager / Open SPIM plugin?
I also have an Omicron LightHub-4 with currently only 2 lasers, but the Openspim plugin is not recognizing any of the lasers. Do you have any idea how to get it working?
... In MM the lasers are visible.

Thanks in advance,

Andreas

----------------------------------------------
Dr. Andreas Girod
Coordinator Light Microscopy Facility
Life Sciences Research Unit-FSTC
University of Luxembourg
Building: Bâtiment Des Sciences
162A, ave de la Faiencerie, Campus Limpertsberg
L-1511 Luxembourg



Phone Office            +352 46 66 44 6863
Phone Mobile           +352 62 12 14 889
Fax (office)                +352 46 66 44 6371
FAX (unit office)        +352 46 66 44 6435
Office  room no         BS 3.08b
Microscope room      BS 3.17
E-mail : andreas.girod at uni.lu<mailto:andreas.girod at uni.lu>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://openspim.org/pipermail/openspim/attachments/20150609/aa058f82/attachment-0002.html>