[OpenSPIM] 回复： A trouble in initial hardware configuration of thelaser

[政]

Dear Peter,
   Thank you for your help! I have found the field to input the port of the laser. But the shutter of the laser can not be recognize in the next page, and there is no option in the shutter listbox. I hope this would not affect the experiment.


All well! 


------------------
Zheng Huang
State Key Laboratory of High Field Laser Physics, Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, Shanghai 201800, China
Address: Qinghe Road No. 390, Jiading District, Shanghai 201800, China 
Tel: 13120836853
E-mail: 709314090 at qq.com


 




------------------ 原始邮件 ------------------
发件人: "Peter Pitrone";<pitrone at mpi-cbg.de>;
发送时间: 2015年7月16日(星期四) 晚上11:29
收件人: "政"<709314090 at qq.com>; 

主题: Re: [OpenSPIM] A trouble in initial hardware configuration of thelaser



Dear Zheng,

The chances are that you need to input the info yourself. Although we dod not have a Omicron laser, my gut feeling is that it is very similar to the Coherent lasers (CUBE and Obis) in that it uses a a 19,200 baud rate on a COM-port. I've never successfully used the "scan" button while creating a harware configuration.

Maybe there are other out there that can help you out more.

Regards,
Pete

----- Ursprüngliche Mail -----
Von: "政" <709314090 at qq.com>
An: "OpenSPIM" <OpenSPIM at openspim.org>
Gesendet: Donnerstag, 16. Juli 2015 17:06:01
Betreff: [OpenSPIM] A trouble in initial hardware configuration of the laser

Dear all, 
Today, I just did the i nitial hardware configuration, but there was something worng with the laser configuration. 
The laser I used is LuxX ® 488-60 Omicron and is connected to PC with USB line, and t he laser can be controlled by the software provided by the manufacturer. When I add the laser in the hardware c onfiguration wizard, it present a window but nothing in the list of the RS232 settings(the below pictrue, I don't know whether the pictrue can be show). And I try to click the "Scan" button, then alert a window tells that the port should be choosen manually. Also, when click the "OK" button, a window show and alert that "Serial command failed. Is the device connected to the serial port?". Therefore, the laser can not be added. 
Is there anyone else meet the trouble? I hope for your help. Thank you! 
Best wishes! 



------------------ 
Zheng Huang 
State Key Laboratory of High Field Laser Physics, Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, Shanghai 201800, China 
Address: Qinghe Road No. 390, Jiading District, Shanghai 201800 , China 
Tel: 13120836853 
E-mail: 709314090 at qq.com 

_______________________________________________
OpenSPIM mailing list
OpenSPIM at openspim.org
http://openspim.org/mailman/listinfo/openspim
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://openspim.org/pipermail/openspim/attachments/20150717/22521a48/attachment.html>