[OpenSPIM] OpenSPIM Digest, Vol 14, Issue 20
Aurelia Honerkamp-Smith
aureliaomega at gmail.com
Tue Jul 1 12:14:51 CDT 2014
Hi again,
Yep, the COM3 messages stop when I get rid of the extra line in the
configuration file. Oh! This is exciting! After I start up and load the
configuration file without the extra COM3 line, I can start the plugin, and
move the stage! However, when I try to start live view, I then get a
Micro-Manager error: "Error in device Camera-1: The device cannot set this
property at the moment." Trying to use Snap gives "Error Acquiring: null."
Well, it was exciting for me anyhow. Another corelog is attached.
Aurelia
On Tue, Jul 1, 2014 at 5:32 PM, Luke Stuyvenberg <stuyvenberg at wisc.edu>
wrote:
> Hi Aurelia,
>
> > Thanks! I've replaced rsyntaxtextarea.jar. I can now configure all 3
> components, although I still get the COM3 error messages. The shutter and
> camera then seem to function, but I can't start the SPIM plugin to see
> if the stage is working. I don't get an error message that says my
> setup is invalid, the plugin just fails to start. I attach the
> configuration file that I have just made, and a corelog showing an attempt
> to start the plugin.
>
> The COM3 error message is happening because of the duplicate line in the
> configuration file -- though, if the configurator is generating this file
> each time, there is probably an underlying issue that requires
> investigation. (Unfortunately, it isn't obvious to me why this might
> happen; finding this out could take time.) A quick fix would be to edit the
> config file in a text editor and remove line 7 or 8
> ("Device,COM3,SerialManager,COM3").
>
>
> The SPIM plugin won't start because the stage configuration is confusing
> it. Two possibilities: Either the COM3 error is leaving the stages only
> partially initialized, so the stage position is invalid (out of the stage's
> range, according to its properties), or a stage (usually the twister) was
> left in a position outside its accepted range. Given the PVCAM exception
> earlier in the CoreLog, I would assume the former -- but to be sure, before
> starting the system, please try using the Picard software to home the three
> linear stages and zero the rotational stage, leaving them all inside the
> usual position range.
>
>
> On 07/01/14, Aurelia Honerkamp-Smith wrote:
> > My system info is:
> >
> > --------------- S Y S T E M ---------------
> >
> > OS: Windows 7 Build 7601 Service Pack 1
> >
> > CPU:total 12 (6 cores per cpu, 2 threads per core) family 6 model 45
> stepping 7, cmov, cx8, fxsr, mmx, sse, sse2, sse3, ssse3, sse4.1, sse4.2,
> popcnt, ht
> >
> > Memory: 4k page, physical 66506940k(61696496k free), swap
> 133012024k(127977948k free)
> >
> > vm_info: Java HotSpot(TM) Client VM (19.1-b02) for windows-x86 JRE
> (1.6.0_24-b07), built on Feb 2 2011 17:44:41 by "java_re" with MS VC++ 7.1
> (VS2003)
> >
> >
> > Is that the system information you need?
>
>
>
> Yes, thank you! It doesn't reveal much about the problem, but at the very
> least it confirms that the system should be working...
>
>
> Just to keep track of what we've done so far (so I know what to change in
> the next update):
> - Updated mmgr_dal_SerialManager.dll and all system DALs to the latest
> versions.
> - Replaced rsyntaxtextarea.jar with Micro-Manager's preferred version.
>
>
> Nearly there, I think!
> Luke
>
>
> On 07/01/14, Aurelia Honerkamp-Smith wrote:
> > Hi again,
> >
> >
> > Thanks! I've replaced rsyntaxtextarea.jar. I can now configure all 3
> components, although I still get the COM3 error messages. The shutter and
> camera then seem to function, but I can't start the SPIM plugin to see
> if the stage is working. I don't get an error message that says my
> setup is invalid, the plugin just fails to start. I attach the
> configuration file that I have just made, and a corelog showing an attempt
> to start the plugin. My system info is:
> >
> > --------------- S Y S T E M ---------------
> >
> > OS: Windows 7 Build 7601 Service Pack 1
> >
> > CPU:total 12 (6 cores per cpu, 2 threads per core) family 6 model 45
> stepping 7, cmov, cx8, fxsr, mmx, sse, sse2, sse3, ssse3, sse4.1, sse4.2,
> popcnt, ht
> >
> > Memory: 4k page, physical 66506940k(61696496k free), swap
> 133012024k(127977948k free)
> >
> > vm_info: Java HotSpot(TM) Client VM (19.1-b02) for windows-x86 JRE
> (1.6.0_24-b07), built on Feb 2 2011 17:44:41 by "java_re" with MS VC++ 7.1
> (VS2003)
> >
> >
> > Is that the system information you need?
> >
> >
> >
> >
> > On Mon, Jun 30, 2014 at 7:37 PM, Luke Stuyvenberg <
> aureliaomega at gmail.com <stuyvenberg at wisc.edu')" target="1">
> stuyvenberg at wisc.edu> wrote:
> >
> > > Hi,
> > >
> > > One further thought -- the Java error at the top of the log file comes
> from a conflict in rsyntaxtextarea.jar (some e-mails on the MM mailing list
> discuss this issue, and we're working on porting Fiji/IJ2 to a newer
> version of the jar) -- I expected that having these in conflict would only
> disable the Micro-Manager script editor, but some testing suggests it might
> be more disruptive than that. Another fix you can try without waiting on
> me: From vanilla MM, copy: "plugins/Micro-Manager/rsyntaxtextarea.jar" ->
> (in OpenSPIM.app) "jars/rsyntaxtextarea.jar"; then, move, rename, or delete
> "jars/rsyntaxtextarea-2.0.4.1.jar".
> > >
> > >
> > > Thanks again,
> > > Luke
> > >
> > > On 06/30/14, Luke Stuyvenberg wrote:
> > > > Hi Aurelia,
> > > >
> > > > Could you attach your configuration file, and report your system
> specs (OS version/architecture) as well? The core log certainly seems to
> suggest it is attempting to load COM3 multiple times (it also seems to
> reset the serial port properties with each stage loaded from PicardStage),
> but short of that, I'm still not entirely certain what's going on.
> If the 24 June device adapters weren't correct, they probably
> wouldn't load at all, so presumably you've already copied all the
> right DLLs. (SerialManager and ThorlabsSC10 are self-contained, so just
> those files should be enough to run those devices; PVCAM has an external
> DLL, but your core log suggests the camera initializes without a problem.)
> > > >
> > > >
> > > > Thanks,
> > > > Luke
> > > >
> > > > On 06/30/14, Aurelia Honerkamp-Smith wrote:
> > > > > Sorry, I meant to also say that I can't load individual
> components, I get the same error messages about COM3. The only
> configuration I can actually complete is the shutter on its own, but it
> doesn't function.
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > On Mon, Jun 30, 2014 at 6:55 PM, Aurelia Honerkamp-Smith <
> http://openspim.org/mailman/listinfo/openspim(java_script:main.compose('new(java_script:main.compose('new(http://openspim.org/mailman/listinfo/openspim(java_script:main.compose('new(java_script:main.compose('new)'(javascript:main.compose('new',
> 't=aureliaomega at gmail.com>(java_script:main.compose()> wrote:
> > > > >
> > > > > > Hi!,
> > > > > >
> > > > > > With the SerialManager dll from June 24, I get the same error
> messages but entire system doesn't crash, it seems to be an
> improvement! New core log is attached again.
> > > > > >
> > > > > > Thanks again!
> > > > > > Aurelia
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > On Mon, Jun 30, 2014 at 6:01 PM, Luke Stuyvenberg <
> stuyvenberg at wisc.edu <stuyvenberg at wisc.edu>(java_script:main.compose()>
> wrote:
> > > > > >
> > > > > > > Hi Aurelia,
> > > > > > >
> > > > > > > On 06/30/14, Aurelia Honerkamp-Smith wrote:
> > > > > > > > Thank you! I am still having a problem, probably because
> I'm using a nonstandard setup. There seems to be a conflict in loading
> my camera (a PVCam one) and the shutter I use to block the laser (Thorlabs
> SC10); when I try to configure, I get a message "the specified label COM3
> is already in use" before anything has been configured, and then several
> times after I load both, one that says "Line8: device, COM3, serialmanager,
> COM3." The shutter should be on COM3 but not the camera, and I don't
> run into this conflict when I load both shutter and camera in the vanilla
> MM from 24 June. I attach a core log showing an attempt to load shutter and
> camera.
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > Do the devices work individually in OpenSPIM? i.e. if only one
> is loaded, do you ever get that message? It sounds like a problem with the
> SerialManager, a device adapter which I hadn't updated -- you might try
> pulling mmgr_dal_SerialManager.dll from the 24 June nightly build. I'll
> also be looking into this.
> > > > > > >
> > > > > > >
> > > > > > > On 06/30/14, Aurelia Honerkamp-Smith wrote:
> > > > > > > > The Picard stage now appears in the list of available
> hardware, but when I try to load all three the computer bluescreens.
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > Load all three devices (camera, shutter, stage), or load all
> three stages? Does it bluescreen reliably? (I've not seen/heard of this
> happening before...)
> > > > > > >
> > > > > > >
> > > > > > > I'll let you know what I work out. Thanks again!
> > > > > > > Luke
> > > > > > >
> > > > > > >
> > > > > > > On 06/30/14, Aurelia Honerkamp-Smith wrote:
> > > > > > > > Hi Luke,
> > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > > > > Thank you! I am still having a problem, probably because
> I'm using a nonstandard setup. There seems to be a conflict in loading
> my camera (a PVCam one) and the shutter I use to block the laser (Thorlabs
> SC10); when I try to configure, I get a message "the specified label COM3
> is already in use" before anything has been configured, and then several
> times after I load both, one that says "Line8: device, COM3, serialmanager,
> COM3." The shutter should be on COM3 but not the camera, and I don't
> run into this conflict when I load both shutter and camera in the vanilla
> MM from 24 June. I attach a core log showing an attempt to load shutter and
> camera. The Picard stage now appears in the list of available hardware, but
> when I try to load all three the computer bluescreens.
> > > > > > > >
> > > > > > > >
> > > > > > > > Thanks again,
> > > > > > > > Aurelia
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > On Mon, Jun 30, 2014 at 3:03 PM, Luke Stuyvenberg <
> openspim at openspim.org <openspim at openspim.org>(java_script:main.compose() <
> stuyvenberg at wisc.edu <stuyvenberg at wisc.edu>(java_script:main.compose()')"
> target="1">stuyvenberg at wisc.edu <stuyvenberg at wisc.edu>(java_script:main.compose()>
> wrote:
> > > > > > > >
> > > > > > > > > Hi Aurelia,
> > > > > > > > >
> > > > > > >
> > > > > > > > > Sorry about that; it seems a lot more had changed than I
> had expected. I've updated the update site again, with a number of
> changes (new MMCore, new versions of the device adapters). It tested okay
> on my virtual machine, but if there's still a problem, please let me
> know. If you run into other device adapter problems (i.e. not with
> PicardStage), try getting updated device adapter versions from the nightly
> build as of 24 June or so.
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > Thanks!
> > > > > > > > > Luke
> > > > > > > > >
> > > > > > > > > On 06/29/14, Aurelia Honerkamp-Smith wrote:
> > > > > > > > > > Hello,
> > > > > > > > > >
> > > > > > > > > > I am afraid that after updating to the newest
> PicardStage dll, my previous configuration is unable to load the stage. I
> get an error message:
> > > > > > > > > >
> > > > > > > > > > Line 8: Device,Picard Twister,PicardStage,Picard Twister
> > > > > > > > > > Failed to load device adapter "PicardStage" from
> "C:\Users\ah659\Desktop\OPENSP~1\OpenSPIM.app\mm\win32\mmgr_dal_PicardStage.dll"
> > > > > > > > > >
> > > > > > > > > > Line 9: Device,Picard Z Stage,PicardStage,Picard Z Stage
> > > > > > > > > > Failed to load device adapter "PicardStage" from
> "C:\Users\ah659\Desktop\OPENSP~1\OpenSPIM.app\mm\win32\mmgr_dal_PicardStage.dll"
> > > > > > > > > >
> > > > > > > > > > Line 10: Device,Picard XY Stage,PicardStage,Picard XY
> Stage
> > > > > > > > > > Failed to load device adapter "PicardStage" from
> "C:\Users\ah659\Desktop\OPENSP~1\OpenSPIM.app\mm\win32\mmgr_dal_PicardStage.dll"
> > > > > > > > > >
> > > > > > > > > > Line 22: Property,Picard Twister,Serial Number,60
> > > > > > > > > > No device with label "Picard Twister"
> > > > > > > > > >
> > > > > > > > > > Line 23: Property,Picard Z Stage,Serial Number,181
> > > > > > > > > > No device with label "Picard Z Stage"
> > > > > > > > > >
> > > > > > > > > > Line 24: Property,Picard XY Stage,Serial Number (X),182
> > > > > > > > > > No device with label "Picard XY Stage"
> > > > > > > > > >
> > > > > > > > > > Line 25: Property,Picard XY Stage,Serial Number (Y),180
> > > > > > > > > > No device with label "Picard XY Stage"
> > > > > > > > > >
> > > > > > > > > > Line 26: Property,Picard XY Stage,X-Max,8000
> > > > > > > > > > No device with label "Picard XY Stage"
> > > > > > > > > >
> > > > > > > > > > Line 27: Property,Picard XY Stage,X-Min,1
> > > > > > > > > > No device with label "Picard XY Stage"
> > > > > > > > > >
> > > > > > > > > > Line 28: Property,Picard XY Stage,Y-Max,8000
> > > > > > > > > > No device with label "Picard XY Stage"
> > > > > > > > > >
> > > > > > > > > > Line 29: Property,Picard XY Stage,Y-Min,1
> > > > > > > > > > No device with label "Picard XY Stage"
> > > > > > > > > >
> > > > > > > > > > Line 44: Property,Core,Focus,Picard Z Stage
> > > > > > > > > > Cannot set Core property Focus to invalid value "Picard
> Z Stage"
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > > I can still load the camera and my shutter. The Picard
> Stage now appears unavailable in the hardware configuration wizard. I am
> also using 32-bit Fiji on a 64-bit machine, but haven't had trouble
> loading the stage before (it appeared to work normally, with the exception
> of the occasional communication delay that I mentioned earlier). I attach a
> core log.
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > > > > On Sat, Jun 28, 2014 at 6:00 PM, <>
> _______________________________________________
> > > > OpenSPIM mailing list
> > > > OpenSPIM at openspim.org <OpenSPIM at openspim.org>
> > >
> > > > http://openspim.org/mailman/listinfo/openspim
> > >
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://openspim.org/pipermail/openspim/attachments/20140701/15c711f0/attachment-0002.html>
-------------- next part --------------
2014-07-01T18:06:57.599269 tid6872 [IFO,LogManager] Enabled primary log file C:\Users\ah659\Desktop\OpenSPIM-20130131\OpenSPIM.app\CoreLogs\CoreLog20140701T180657_pid2352.txt
2014-07-01T18:06:57.599269 tid6872 [IFO,App] User: ah659
2014-07-01T18:06:57.599269 tid6872 [IFO,App] Host: invert
2014-07-01T18:06:57.599269 tid6872 [IFO,App] MM Studio version: 1.4.x dev
2014-07-01T18:06:57.599269 tid6872 [IFO,App] MMCore version 3.0.0
2014-07-01T18:06:57.599269 tid6872 [IFO,App] Device API version 60, Module API version 10
2014-07-01T18:06:57.599269 tid6872 [IFO,App] Operating System: Windows 7 (x86) 6.1
2014-07-01T18:06:57.599269 tid6872 [IFO,App] JVM: Java HotSpot(TM) Client VM, version 1.6.0_24, 32-bit
2014-07-01T18:06:57.721281 tid4964 [IFO,App] Attempting to install plugin spim.SPIMAcquisition
2014-07-01T18:06:57.737282 tid4964 [IFO,App] Attempting to install autofocus plugin Autofocus
2014-07-01T18:06:57.739283 tid4964 [IFO,App] Attempting to install autofocus plugin AutofocusDuo
2014-07-01T18:06:57.740283 tid4964 [IFO,App] Attempting to install autofocus plugin AutofocusTB
2014-07-01T18:06:57.741283 tid4964 [IFO,App] Attempting to install autofocus plugin OughtaFocus
2014-07-01T18:07:06.688177 tid6872 [IFO,Core] All devices unloaded.
2014-07-01T18:07:06.691178 tid6872 [IFO,Core] Device COM3 loaded from SerialManager and labeled as COM3
2014-07-01T18:07:06.693178 tid6872 [IFO,Core] Device Camera-1 loaded from PVCAM and labeled as Camera-1
2014-07-01T18:07:06.694178 tid6872 [IFO,Core] Device SC10 loaded from ThorlabsSC10 and labeled as SC10
2014-07-01T18:07:06.697178 tid6872 [IFO,Core] Device Picard Twister loaded from PicardStage and labeled as Picard Twister
2014-07-01T18:07:06.697178 tid6872 [IFO,Core] Device Picard Z Stage loaded from PicardStage and labeled as Picard Z Stage
2014-07-01T18:07:06.697178 tid6872 [IFO,Core] Device Picard XY Stage loaded from PicardStage and labeled as Picard XY Stage
2014-07-01T18:07:06.772186 tid6872 [IFO,Core] Starting initialization sequence for 6 devices...
2014-07-01T18:07:06.780187 tid6872 [IFO,Core] Device COM3 initialized.
2014-07-01T18:07:06.782187 tid6872 [IFO,dev:Camera-1] PVCAM VERSION: 3.0.3. Number of cameras detected: 1
2014-07-01T18:07:06.810190 tid6872 [IFO,dev:Camera-1] Building Speed Table
2014-07-01T18:07:06.929202 tid6872 [IFO,dev:Camera-1] Initializing Static Camera Properties
2014-07-01T18:07:06.941203 tid6872 [IFO,dev:Camera-1] Initializing Dynamic Camera Properties
2014-07-01T18:07:06.982207 tid6872 [IFO,dev:Camera-1] This Camera does not have EM Gain
2014-07-01T18:07:06.982207 tid6872 [IFO,dev:Camera-1] Frame Transfer mode not available
2014-07-01T18:07:07.031212 tid6872 [IFO,dev:Camera-1] Using PVCAM callbacks for frame acquisition
2014-07-01T18:07:07.031212 tid6872 [IFO,Core] Device Camera-1 set as default camera.
2014-07-01T18:07:07.031212 tid6872 [IFO,Core] Device Camera-1 initialized.
2014-07-01T18:07:07.082217 tid6872 [IFO,dev:SC10] THORLABS SC10 VERSION 1.07
2014-07-01T18:07:07.097218 tid6872 [IFO,Core] Device SC10 set as default shutter.
2014-07-01T18:07:07.097218 tid6872 [IFO,Core] Device SC10 initialized.
2014-07-01T18:07:07.120221 tid6872 [IFO,Core] Device Picard Twister initialized.
2014-07-01T18:07:07.144223 tid6872 [IFO,Core] Device Picard Z Stage initialized.
2014-07-01T18:07:07.156224 tid6872 [IFO,Core] Device Picard XY Stage set as default xyStage.
2014-07-01T18:07:07.156224 tid6872 [IFO,Core] Device Picard XY Stage initialized.
2014-07-01T18:07:07.156224 tid6872 [IFO,Core] Camera device set to Camera-1
2014-07-01T18:07:07.156224 tid6872 [IFO,Core] Focus device set to Picard Z Stage
2014-07-01T18:07:07.220231 tid6872 [IFO,Core] System state cache updated.
2014-07-01T18:07:07.273236 tid6872 [IFO,dev:SC10] 0
2014-07-01T18:07:07.284237 tid6872 [IFO,Core] System state cache updated.
2014-07-01T18:07:07.317240 tid6872 [IFO,App] Startup script file (C:\Users\ah659\Desktop\OpenSPIM-20130131\OpenSPIM.app\MMStartup.bsh) not present.
2014-07-01T18:07:11.265635 tid6872 [IFO,dev:SC10] 0
2014-07-01T18:07:11.300639 tid6872 [IFO,dev:Camera-1] Started sequence on Camera-1, at 457553231 300639, with 2147483647 and 0 ms
2014-07-01T18:07:13.170826 tid6872 [IFO,App] Stop called in LivemodeTimer, true
2014-07-01T18:07:13.279837 tid6872 [IFO,dev:SC10] 1
2014-07-01T18:07:15.244033 tid6872 [IFO,dev:SC10] 0
2014-07-01T18:07:15.738082 tid6872 [IFO,dev:SC10] 0
2014-07-01T18:07:16.058114 tid6872 [IFO,dev:SC10] 1
2014-07-01T18:07:18.981407 tid6872 [IFO,App] Plugin command: Acquire SPIM image
2014-07-01T18:07:18.997408 tid6872 [IFO,Core] Resolution ID Uncalibrated: for device Core defined as Initialize=1
2014-07-01T18:07:18.997408 tid6872 [IFO,Core] Pixel size 1.000000 um set for resolution ID: Uncalibrated
2014-07-01T18:07:18.997408 tid6872 [IFO,Core] Starting initialization sequence for 6 devices...
2014-07-01T18:07:18.997408 tid6872 [IFO,Core] Device COM3 initialized.
2014-07-01T18:07:18.997408 tid6872 [IFO,dev:Camera-1] PVCAM VERSION: 3.0.3. Number of cameras detected: 1
2014-07-01T18:07:18.997408 tid6872 [IFO,dev:Camera-1] PVCAM API error: "C0_CAM_NAME_NOT_FOUND This is not a valid name for opening the camera", code: 14
[ ] In file: PVCAMUniversal.cpp, line: 325, pl_cam_open
2014-07-01T18:07:18.997408 tid6872 [IFO,Core] Error occurred. Device Camera-1. Error in device Camera-1: C0_CAM_NAME_NOT_FOUND This is not a valid name for opening the camera.
2014-07-01T18:07:18.997408 tid6872 [IFO,Core] Error occurred. Device setPixelSizeConfig. Device error encountered.
2014-07-01T18:07:18.998408 tid6872 [IFO,App] Couldn't define uncalibrated pixel size:
2014-07-01T18:07:18.998408 tid6872 [IFO,App] java.lang.Exception: Error in device Camera-1: C0_CAM_NAME_NOT_FOUND This is not a valid name for opening the camera.
[ ] at mmcorej.MMCoreJJNI.CMMCore_setPixelSizeConfig(Native Method)
[ ] at mmcorej.CMMCore.setPixelSizeConfig(CMMCore.java:777)
[ ] at spim.SPIMAcquisition.ensurePixelResolution(SPIMAcquisition.java:263)
[ ] at spim.SPIMAcquisition.show(SPIMAcquisition.java:220)
[ ] at org.micromanager.MMStudioMainFrame.displayPlugin(MMStudioMainFrame.java:2755)
[ ] at org.micromanager.MMStudioMainFrame.access$5800(MMStudioMainFrame.java:157)
[ ] at org.micromanager.MMStudioMainFrame$49.run(MMStudioMainFrame.java:2720)
[ ] at org.micromanager.utils.GUIUtils$3.actionPerformed(GUIUtils.java:303)
[ ] at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
[ ] at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2318)
[ ] at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
[ ] at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
[ ] at javax.swing.AbstractButton.doClick(AbstractButton.java:357)
[ ] at javax.swing.plaf.basic.BasicMenuItemUI.doClick(BasicMenuItemUI.java:809)
[ ] at javax.swing.plaf.basic.BasicMenuItemUI$Handler.mouseReleased(BasicMenuItemUI.java:850)
[ ] at java.awt.AWTEventMulticaster.mouseReleased(AWTEventMulticaster.java:272)
[ ] at java.awt.Component.processMouseEvent(Component.java:6289)
[ ] at javax.swing.JComponent.processMouseEvent(JComponent.java:3267)
[ ] at java.awt.Component.processEvent(Component.java:6054)
[ ] at java.awt.Container.processEvent(Container.java:2041)
[ ] at java.awt.Component.dispatchEventImpl(Component.java:4652)
[ ] at java.awt.Container.dispatchEventImpl(Container.java:2099)
[ ] at java.awt.Component.dispatchEvent(Component.java:4482)
[ ] at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4577)
[ ] at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4238)
[ ] at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4168)
[ ] at java.awt.Container.dispatchEventImpl(Container.java:2085)
[ ] at java.awt.Window.dispatchEventImpl(Window.java:2478)
[ ] at java.awt.Component.dispatchEvent(Component.java:4482)
[ ] at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:644)
[ ] at java.awt.EventQueue.access$000(EventQueue.java:85)
[ ] at java.awt.EventQueue$1.run(EventQueue.java:603)
[ ] at java.awt.EventQueue$1.run(EventQueue.java:601)
[ ] at java.security.AccessController.doPrivileged(Native Method)
[ ] at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
[ ] at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:98)
[ ] at java.awt.EventQueue$2.run(EventQueue.java:617)
[ ] at java.awt.EventQueue$2.run(EventQueue.java:615)
[ ] at java.security.AccessController.doPrivileged(Native Method)
[ ] at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
[ ] at java.awt.EventQueue.dispatchEvent(EventQueue.java:614)
[ ] at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
[ ] at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
[ ] at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
[ ] at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
[ ] at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
[ ] at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
2014-07-01T18:07:29.535462 tid6872 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 125, pl_get_param ATTR_CURRENT
2014-07-01T18:07:29.535462 tid6872 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 160, pl_set_param
2014-07-01T18:07:29.535462 tid6872 [IFO,App]
[ ] java.lang.Exception: Error in device Camera-1: The device can not set this property at this moment. in Thread[AWT-EventQueue-0,6,main]
[ ] at mmcorej.MMCoreJJNI.CMMCore_startContinuousSequenceAcquisition(Native Method)
[ ] at mmcorej.CMMCore.startContinuousSequenceAcquisition(CMMCore.java:909)
[ ] at org.micromanager.acquisition.LiveModeTimer.begin(LiveModeTimer.java:162)
[ ] at org.micromanager.MMStudioMainFrame.enableLiveMode(MMStudioMainFrame.java:3881)
[ ] at org.micromanager.MMStudioMainFrame$10.run(MMStudioMainFrame.java:1018)
[ ] at org.micromanager.utils.GUIUtils$4.actionPerformed(GUIUtils.java:404)
[ ] at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
[ ] at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2318)
[ ] at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
[ ] at javax.swing.JToggleButton$ToggleButtonModel.setPressed(JToggleButton.java:291)
[ ] at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
[ ] at java.awt.AWTEventMulticaster.mouseReleased(AWTEventMulticaster.java:272)
[ ] at java.awt.Component.processMouseEvent(Component.java:6289)
[ ] at javax.swing.JComponent.processMouseEvent(JComponent.java:3267)
[ ] at java.awt.Component.processEvent(Component.java:6054)
[ ] at java.awt.Container.processEvent(Container.java:2041)
[ ] at java.awt.Component.dispatchEventImpl(Component.java:4652)
[ ] at java.awt.Container.dispatchEventImpl(Container.java:2099)
[ ] at java.awt.Component.dispatchEvent(Component.java:4482)
[ ] at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4577)
[ ] at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4238)
[ ] at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4168)
[ ] at java.awt.Container.dispatchEventImpl(Container.java:2085)
[ ] at java.awt.Window.dispatchEventImpl(Window.java:2478)
[ ] at java.awt.Component.dispatchEvent(Component.java:4482)
[ ] at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:644)
[ ] at java.awt.EventQueue.access$000(EventQueue.java:85)
[ ] at java.awt.EventQueue$1.run(EventQueue.java:603)
[ ] at java.awt.EventQueue$1.run(EventQueue.java:601)
[ ] at java.security.AccessController.doPrivileged(Native Method)
[ ] at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
[ ] at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:98)
[ ] at java.awt.EventQueue$2.run(EventQueue.java:617)
[ ] at java.awt.EventQueue$2.run(EventQueue.java:615)
[ ] at java.security.AccessController.doPrivileged(Native Method)
[ ] at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
[ ] at java.awt.EventQueue.dispatchEvent(EventQueue.java:614)
[ ] at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
[ ] at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
[ ] at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
[ ] at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
[ ] at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
[ ] at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
2014-07-01T18:07:31.320640 tid6872 [IFO,App] Stop called in LivemodeTimer, true
2014-07-01T18:08:30.515559 tid6872 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 125, pl_get_param ATTR_CURRENT
2014-07-01T18:08:30.515559 tid6872 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 160, pl_set_param
2014-07-01T18:08:30.516559 tid6872 [IFO,App]
[ ] java.lang.Exception: Error in device Camera-1: The device can not set this property at this moment. in Thread[AWT-EventQueue-0,6,main]
[ ] at mmcorej.MMCoreJJNI.CMMCore_startContinuousSequenceAcquisition(Native Method)
[ ] at mmcorej.CMMCore.startContinuousSequenceAcquisition(CMMCore.java:909)
[ ] at org.micromanager.acquisition.LiveModeTimer.begin(LiveModeTimer.java:162)
[ ] at org.micromanager.MMStudioMainFrame.enableLiveMode(MMStudioMainFrame.java:3881)
[ ] at spim.SPIMAcquisition$12.itemStateChanged(SPIMAcquisition.java:825)
[ ] at javax.swing.AbstractButton.fireItemStateChanged(AbstractButton.java:2023)
[ ] at javax.swing.AbstractButton$Handler.itemStateChanged(AbstractButton.java:2325)
[ ] at javax.swing.DefaultButtonModel.fireItemStateChanged(DefaultButtonModel.java:440)
[ ] at javax.swing.JToggleButton$ToggleButtonModel.setSelected(JToggleButton.java:255)
[ ] at javax.swing.JToggleButton$ToggleButtonModel.setPressed(JToggleButton.java:272)
[ ] at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
[ ] at java.awt.Component.processMouseEvent(Component.java:6289)
[ ] at javax.swing.JComponent.processMouseEvent(JComponent.java:3267)
[ ] at java.awt.Component.processEvent(Component.java:6054)
[ ] at java.awt.Container.processEvent(Container.java:2041)
[ ] at java.awt.Component.dispatchEventImpl(Component.java:4652)
[ ] at java.awt.Container.dispatchEventImpl(Container.java:2099)
[ ] at java.awt.Component.dispatchEvent(Component.java:4482)
[ ] at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4577)
[ ] at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4238)
[ ] at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4168)
[ ] at java.awt.Container.dispatchEventImpl(Container.java:2085)
[ ] at java.awt.Window.dispatchEventImpl(Window.java:2478)
[ ] at java.awt.Component.dispatchEvent(Component.java:4482)
[ ] at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:644)
[ ] at java.awt.EventQueue.access$000(EventQueue.java:85)
[ ] at java.awt.EventQueue$1.run(EventQueue.java:603)
[ ] at java.awt.EventQueue$1.run(EventQueue.java:601)
[ ] at java.security.AccessController.doPrivileged(Native Method)
[ ] at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
[ ] at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:98)
[ ] at java.awt.EventQueue$2.run(EventQueue.java:617)
[ ] at java.awt.EventQueue$2.run(EventQueue.java:615)
[ ] at java.security.AccessController.doPrivileged(Native Method)
[ ] at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
[ ] at java.awt.EventQueue.dispatchEvent(EventQueue.java:614)
[ ] at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
[ ] at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
[ ] at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
[ ] at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
[ ] at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
[ ] at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
2014-07-01T18:08:31.692677 tid6872 [IFO,App] Stop called in LivemodeTimer, true
2014-07-01T18:08:34.956003 tid7120 [IFO,dev:SC10] 0
2014-07-01T18:08:34.972005 tid7120 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 1594,
2014-07-01T18:08:34.972005 tid7120 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 1596,
2014-07-01T18:08:34.972005 tid7120 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 125, pl_get_param ATTR_CURRENT
2014-07-01T18:08:34.972005 tid7120 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 160, pl_set_param
2014-07-01T18:08:34.972005 tid7120 [IFO,dev:Camera-1] Error code 32: The device can not set this property at this moment
[ ] In file: PVCAMUniversal.cpp, line: 1604,
2014-07-01T18:08:34.972005 tid7120 [IFO,Core] Error occurred. Device CMMCore::snapImage. Error in device Camera-1: The device can not set this property at this moment.
2014-07-01T18:08:34.972005 tid7120 [IFO,App]
[ ] java.lang.Exception: Error in device Camera-1: The device can not set this property at this moment. in Thread[Thread-25,6,main]
[ ] at mmcorej.MMCoreJJNI.CMMCore_snapImage(Native Method)
[ ] at mmcorej.CMMCore.snapImage(CMMCore.java:825)
[ ] at spim.setup.Camera.snapImage(Camera.java:27)
[ ] at spim.progacq.ProgrammaticAcquisitor.snapImage(ProgrammaticAcquisitor.java:242)
[ ] at spim.progacq.ProgrammaticAcquisitor.performAcquisition(ProgrammaticAcquisitor.java:435)
[ ] at spim.SPIMAcquisition$25.run(SPIMAcquisition.java:1776)
2014-07-01T18:08:34.988007 tid7120 [IFO,dev:SC10] 1
2014-07-01T18:08:36.433151 tid7120 [IFO,App] Thread 62 (Thread-25) terminated with uncaught exception
2014-07-01T18:08:36.433151 tid7120 [IFO,App] java.lang.Error: Error acquiring!
2014-07-01T18:08:36.433151 tid7120 [IFO,App] at spim.SPIMAcquisition$25.run(SPIMAcquisition.java:1784)
2014-07-01T18:08:36.433151 tid7120 [IFO,App] Caused by exception:
2014-07-01T18:08:36.433151 tid7120 [IFO,App] java.lang.NullPointerException
2014-07-01T18:08:36.433151 tid7120 [IFO,App] at org.micromanager.utils.ImageUtils.makeProcessor(ImageUtils.java:98)
2014-07-01T18:08:36.433151 tid7120 [IFO,App] at spim.progacq.ProgrammaticAcquisitor.performAcquisition(ProgrammaticAcquisitor.java:443)
2014-07-01T18:08:36.433151 tid7120 [IFO,App] at spim.SPIMAcquisition$25.run(SPIMAcquisition.java:1776)
2014-07-01T18:08:38.868395 tid6872 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 125, pl_get_param ATTR_CURRENT
2014-07-01T18:08:38.868395 tid6872 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 160, pl_set_param
2014-07-01T18:08:38.868395 tid6872 [IFO,App]
[ ] java.lang.Exception: Error in device Camera-1: The device can not set this property at this moment. in Thread[AWT-EventQueue-0,6,main]
[ ] at mmcorej.MMCoreJJNI.CMMCore_startContinuousSequenceAcquisition(Native Method)
[ ] at mmcorej.CMMCore.startContinuousSequenceAcquisition(CMMCore.java:909)
[ ] at org.micromanager.acquisition.LiveModeTimer.begin(LiveModeTimer.java:162)
[ ] at org.micromanager.MMStudioMainFrame.enableLiveMode(MMStudioMainFrame.java:3881)
[ ] at spim.SPIMAcquisition$12.itemStateChanged(SPIMAcquisition.java:825)
[ ] at javax.swing.AbstractButton.fireItemStateChanged(AbstractButton.java:2023)
[ ] at javax.swing.AbstractButton$Handler.itemStateChanged(AbstractButton.java:2325)
[ ] at javax.swing.DefaultButtonModel.fireItemStateChanged(DefaultButtonModel.java:440)
[ ] at javax.swing.JToggleButton$ToggleButtonModel.setSelected(JToggleButton.java:255)
[ ] at javax.swing.JToggleButton$ToggleButtonModel.setPressed(JToggleButton.java:272)
[ ] at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
[ ] at java.awt.Component.processMouseEvent(Component.java:6289)
[ ] at javax.swing.JComponent.processMouseEvent(JComponent.java:3267)
[ ] at java.awt.Component.processEvent(Component.java:6054)
[ ] at java.awt.Container.processEvent(Container.java:2041)
[ ] at java.awt.Component.dispatchEventImpl(Component.java:4652)
[ ] at java.awt.Container.dispatchEventImpl(Container.java:2099)
[ ] at java.awt.Component.dispatchEvent(Component.java:4482)
[ ] at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4577)
[ ] at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4238)
[ ] at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4168)
[ ] at java.awt.Container.dispatchEventImpl(Container.java:2085)
[ ] at java.awt.Window.dispatchEventImpl(Window.java:2478)
[ ] at java.awt.Component.dispatchEvent(Component.java:4482)
[ ] at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:644)
[ ] at java.awt.EventQueue.access$000(EventQueue.java:85)
[ ] at java.awt.EventQueue$1.run(EventQueue.java:603)
[ ] at java.awt.EventQueue$1.run(EventQueue.java:601)
[ ] at java.security.AccessController.doPrivileged(Native Method)
[ ] at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
[ ] at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:98)
[ ] at java.awt.EventQueue$2.run(EventQueue.java:617)
[ ] at java.awt.EventQueue$2.run(EventQueue.java:615)
[ ] at java.security.AccessController.doPrivileged(Native Method)
[ ] at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
[ ] at java.awt.EventQueue.dispatchEvent(EventQueue.java:614)
[ ] at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
[ ] at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
[ ] at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
[ ] at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
[ ] at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
[ ] at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
2014-07-01T18:10:22.809788 tid6872 [IFO,App] Stop called in LivemodeTimer, true
2014-07-01T18:11:22.320738 tid6660 [IFO,dev:SC10] 0
2014-07-01T18:11:22.336740 tid6660 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 1594,
2014-07-01T18:11:22.336740 tid6660 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 1596,
2014-07-01T18:11:22.336740 tid6660 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 125, pl_get_param ATTR_CURRENT
2014-07-01T18:11:22.336740 tid6660 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 160, pl_set_param
2014-07-01T18:11:22.336740 tid6660 [IFO,dev:Camera-1] Error code 32: The device can not set this property at this moment
[ ] In file: PVCAMUniversal.cpp, line: 1604,
2014-07-01T18:11:22.336740 tid6660 [IFO,Core] Error occurred. Device CMMCore::snapImage. Error in device Camera-1: The device can not set this property at this moment.
2014-07-01T18:11:22.337740 tid6660 [IFO,App]
[ ] java.lang.Exception: Error in device Camera-1: The device can not set this property at this moment. in Thread[Thread-27,6,main]
[ ] at mmcorej.MMCoreJJNI.CMMCore_snapImage(Native Method)
[ ] at mmcorej.CMMCore.snapImage(CMMCore.java:825)
[ ] at spim.setup.Camera.snapImage(Camera.java:27)
[ ] at spim.progacq.ProgrammaticAcquisitor.snapImage(ProgrammaticAcquisitor.java:242)
[ ] at spim.progacq.ProgrammaticAcquisitor.performAcquisition(ProgrammaticAcquisitor.java:435)
[ ] at spim.SPIMAcquisition$25.run(SPIMAcquisition.java:1776)
2014-07-01T18:11:22.351741 tid6660 [IFO,dev:SC10] 1
2014-07-01T18:12:19.938499 tid6660 [IFO,App] Thread 64 (Thread-27) terminated with uncaught exception
2014-07-01T18:12:19.938499 tid6660 [IFO,App] java.lang.Error: Error acquiring!
2014-07-01T18:12:19.938499 tid6660 [IFO,App] at spim.SPIMAcquisition$25.run(SPIMAcquisition.java:1784)
2014-07-01T18:12:19.938499 tid6660 [IFO,App] Caused by exception:
2014-07-01T18:12:19.938499 tid6660 [IFO,App] java.lang.NullPointerException
2014-07-01T18:12:19.938499 tid6660 [IFO,App] at org.micromanager.utils.ImageUtils.makeProcessor(ImageUtils.java:98)
2014-07-01T18:12:19.938499 tid6660 [IFO,App] at spim.progacq.ProgrammaticAcquisitor.performAcquisition(ProgrammaticAcquisitor.java:443)
2014-07-01T18:12:19.938499 tid6660 [IFO,App] at spim.SPIMAcquisition$25.run(SPIMAcquisition.java:1776)
2014-07-01T18:12:30.603566 tid6872 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 654, pl_cam_close
2014-07-01T18:12:30.666572 tid6232 [IFO,Core] Error occurred. Device Picard XY Stage. Error in device Picard XY Stage: Unknown error in the device.
2014-07-01T18:12:30.666572 tid6232 [IFO,App] Couldn't get X position on Picard XY Stage
2014-07-01T18:12:30.666572 tid6232 [IFO,App] java.lang.Exception: Error in device Picard XY Stage: Unknown error in the device.
[ ] at mmcorej.MMCoreJJNI.CMMCore_getXPosition(Native Method)
[ ] at mmcorej.CMMCore.getXPosition(CMMCore.java:1137)
[ ] at spim.setup.GenericXYStage$SubStage.getPosition(GenericXYStage.java:76)
[ ] at spim.SPIMAcquisition.updateMotorPositions(SPIMAcquisition.java:1243)
[ ] at spim.SPIMAcquisition.access$600(SPIMAcquisition.java:94)
[ ] at spim.SPIMAcquisition$18.run(SPIMAcquisition.java:1021)
[ ] at java.util.TimerThread.mainLoop(Timer.java:512)
[ ] at java.util.TimerThread.run(Timer.java:462)
2014-07-01T18:12:30.666572 tid6232 [IFO,Core] Error occurred. Device Picard XY Stage. Error in device Picard XY Stage: Unknown error in the device.
2014-07-01T18:12:30.666572 tid6232 [IFO,App] Couldn't get Y position on Picard XY Stage
2014-07-01T18:12:30.666572 tid6232 [IFO,App] java.lang.Exception: Error in device Picard XY Stage: Unknown error in the device.
[ ] at mmcorej.MMCoreJJNI.CMMCore_getYPosition(Native Method)
[ ] at mmcorej.CMMCore.getYPosition(CMMCore.java:1141)
[ ] at spim.setup.GenericXYStage$SubStage.getPosition(GenericXYStage.java:78)
[ ] at spim.SPIMAcquisition.updateMotorPositions(SPIMAcquisition.java:1246)
[ ] at spim.SPIMAcquisition.access$600(SPIMAcquisition.java:94)
[ ] at spim.SPIMAcquisition$18.run(SPIMAcquisition.java:1021)
[ ] at java.util.TimerThread.mainLoop(Timer.java:512)
[ ] at java.util.TimerThread.run(Timer.java:462)
2014-07-01T18:12:30.666572 tid6232 [IFO,Core] Error occurred. Device Picard Z Stage. Error in device Picard Z Stage: Unable to communicate with the device..
2014-07-01T18:12:30.666572 tid6232 [IFO,App] Couldn't get stage position for Picard Z Stage
2014-07-01T18:12:30.666572 tid6232 [IFO,App] java.lang.Exception: Error in device Picard Z Stage: Unable to communicate with the device..
[ ] at mmcorej.MMCoreJJNI.CMMCore_getPosition(Native Method)
[ ] at mmcorej.CMMCore.getPosition(CMMCore.java:1109)
[ ] at spim.setup.Stage.getPosition(Stage.java:34)
[ ] at spim.SPIMAcquisition.updateMotorPositions(SPIMAcquisition.java:1249)
[ ] at spim.SPIMAcquisition.access$600(SPIMAcquisition.java:94)
[ ] at spim.SPIMAcquisition$18.run(SPIMAcquisition.java:1021)
[ ] at java.util.TimerThread.mainLoop(Timer.java:512)
[ ] at java.util.TimerThread.run(Timer.java:462)
2014-07-01T18:12:30.666572 tid6232 [IFO,Core] Error occurred. Device Picard Twister. Error in device Picard Twister: Unable to communicate with the device..
2014-07-01T18:12:30.667572 tid6232 [IFO,App] Couldn't get stage position for Picard Twister
2014-07-01T18:12:30.667572 tid6232 [IFO,App] java.lang.Exception: Error in device Picard Twister: Unable to communicate with the device..
[ ] at mmcorej.MMCoreJJNI.CMMCore_getPosition(Native Method)
[ ] at mmcorej.CMMCore.getPosition(CMMCore.java:1109)
[ ] at spim.setup.Stage.getPosition(Stage.java:34)
[ ] at spim.setup.PicardTwister.getPosition(PicardTwister.java:27)
[ ] at spim.setup.SPIMSetup.getAngle(SPIMSetup.java:222)
[ ] at spim.SPIMAcquisition.updateMotorPositions(SPIMAcquisition.java:1252)
[ ] at spim.SPIMAcquisition.access$600(SPIMAcquisition.java:94)
[ ] at spim.SPIMAcquisition$18.run(SPIMAcquisition.java:1021)
[ ] at java.util.TimerThread.mainLoop(Timer.java:512)
[ ] at java.util.TimerThread.run(Timer.java:462)
2014-07-01T18:12:30.806586 tid6872 [IFO,Core] All devices unloaded.
2014-07-01T18:12:30.806586 tid6872 [IFO,Core] Device COM3 loaded from SerialManager and labeled as COM3
2014-07-01T18:12:30.806586 tid6872 [IFO,Core] Device Camera-1 loaded from PVCAM and labeled as Camera-1
2014-07-01T18:12:30.806586 tid6872 [IFO,Core] Device SC10 loaded from ThorlabsSC10 and labeled as SC10
2014-07-01T18:12:30.806586 tid6872 [IFO,Core] Device Picard Twister loaded from PicardStage and labeled as Picard Twister
2014-07-01T18:12:30.806586 tid6872 [IFO,Core] Device Picard Z Stage loaded from PicardStage and labeled as Picard Z Stage
2014-07-01T18:12:30.806586 tid6872 [IFO,Core] Device Picard XY Stage loaded from PicardStage and labeled as Picard XY Stage
2014-07-01T18:12:30.882594 tid6872 [IFO,Core] Starting initialization sequence for 6 devices...
2014-07-01T18:12:30.890594 tid6872 [IFO,Core] Device COM3 initialized.
2014-07-01T18:12:30.892595 tid6872 [IFO,dev:Camera-1] PVCAM VERSION: 3.0.3. Number of cameras detected: 1
2014-07-01T18:12:30.928598 tid6872 [IFO,dev:Camera-1] Building Speed Table
2014-07-01T18:12:31.047610 tid6872 [IFO,dev:Camera-1] Initializing Static Camera Properties
2014-07-01T18:12:31.059611 tid6872 [IFO,dev:Camera-1] Initializing Dynamic Camera Properties
2014-07-01T18:12:31.100615 tid6872 [IFO,dev:Camera-1] This Camera does not have EM Gain
2014-07-01T18:12:31.100615 tid6872 [IFO,dev:Camera-1] Frame Transfer mode not available
2014-07-01T18:12:31.149620 tid6872 [IFO,dev:Camera-1] Using PVCAM callbacks for frame acquisition
2014-07-01T18:12:31.149620 tid6872 [IFO,Core] Device Camera-1 set as default camera.
2014-07-01T18:12:31.149620 tid6872 [IFO,Core] Device Camera-1 initialized.
2014-07-01T18:12:31.190624 tid6872 [IFO,dev:SC10] THORLABS SC10 VERSION 1.07
2014-07-01T18:12:31.207626 tid6872 [IFO,Core] Device SC10 set as default shutter.
2014-07-01T18:12:31.207626 tid6872 [IFO,Core] Device SC10 initialized.
2014-07-01T18:12:31.230628 tid6872 [IFO,Core] Device Picard Twister initialized.
2014-07-01T18:12:31.254631 tid6872 [IFO,Core] Device Picard Z Stage initialized.
2014-07-01T18:12:31.266632 tid6872 [IFO,Core] Device Picard XY Stage set as default xyStage.
2014-07-01T18:12:31.266632 tid6872 [IFO,Core] Device Picard XY Stage initialized.
2014-07-01T18:12:31.266632 tid6872 [IFO,Core] Camera device set to Camera-1
2014-07-01T18:12:31.266632 tid6872 [IFO,Core] Focus device set to Picard Z Stage
2014-07-01T18:12:31.330638 tid6872 [IFO,Core] System state cache updated.
2014-07-01T18:12:31.415647 tid6872 [IFO,dev:SC10] 0
2014-07-01T18:12:31.426648 tid6872 [IFO,Core] System state cache updated.
2014-07-01T18:12:31.542660 tid6872 [IFO,dev:SC10] 0
2014-07-01T18:12:31.554661 tid6872 [IFO,Core] System state cache updated.
2014-07-01T18:12:34.305936 tid6872 [IFO,dev:SC10] 0
2014-07-01T18:12:34.340939 tid6872 [IFO,dev:Camera-1] Started sequence on Camera-1, at 457553554 340939, with 2147483647 and 0 ms
2014-07-01T18:12:38.763382 tid6872 [IFO,App] Plugin command: Acquire SPIM image
2014-07-01T18:12:38.763382 tid6872 [IFO,Core] Resolution ID Uncalibrated: for device Core defined as Initialize=1
2014-07-01T18:12:38.763382 tid6872 [IFO,Core] Pixel size 1.000000 um set for resolution ID: Uncalibrated
2014-07-01T18:12:38.763382 tid6872 [IFO,Core] Starting initialization sequence for 6 devices...
2014-07-01T18:12:38.763382 tid6872 [IFO,Core] Device COM3 initialized.
2014-07-01T18:12:38.763382 tid6872 [IFO,dev:Camera-1] PVCAM VERSION: 3.0.3. Number of cameras detected: 1
2014-07-01T18:12:38.763382 tid6872 [IFO,dev:Camera-1] PVCAM API error: "C0_CAM_NAME_NOT_FOUND This is not a valid name for opening the camera", code: 14
[ ] In file: PVCAMUniversal.cpp, line: 325, pl_cam_open
2014-07-01T18:12:38.763382 tid6872 [IFO,Core] Error occurred. Device Camera-1. Error in device Camera-1: C0_CAM_NAME_NOT_FOUND This is not a valid name for opening the camera.
2014-07-01T18:12:38.763382 tid6872 [IFO,Core] Error occurred. Device setPixelSizeConfig. Device error encountered.
2014-07-01T18:12:38.764382 tid6872 [IFO,App] Couldn't define uncalibrated pixel size:
2014-07-01T18:12:38.764382 tid6872 [IFO,App] java.lang.Exception: Error in device Camera-1: C0_CAM_NAME_NOT_FOUND This is not a valid name for opening the camera.
[ ] at mmcorej.MMCoreJJNI.CMMCore_setPixelSizeConfig(Native Method)
[ ] at mmcorej.CMMCore.setPixelSizeConfig(CMMCore.java:777)
[ ] at spim.SPIMAcquisition.ensurePixelResolution(SPIMAcquisition.java:263)
[ ] at spim.SPIMAcquisition.show(SPIMAcquisition.java:220)
[ ] at org.micromanager.MMStudioMainFrame.displayPlugin(MMStudioMainFrame.java:2755)
[ ] at org.micromanager.MMStudioMainFrame.access$5800(MMStudioMainFrame.java:157)
[ ] at org.micromanager.MMStudioMainFrame$49.run(MMStudioMainFrame.java:2720)
[ ] at org.micromanager.utils.GUIUtils$3.actionPerformed(GUIUtils.java:303)
[ ] at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
[ ] at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2318)
[ ] at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
[ ] at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
[ ] at javax.swing.AbstractButton.doClick(AbstractButton.java:357)
[ ] at javax.swing.plaf.basic.BasicMenuItemUI.doClick(BasicMenuItemUI.java:809)
[ ] at javax.swing.plaf.basic.BasicMenuItemUI$Handler.mouseReleased(BasicMenuItemUI.java:850)
[ ] at java.awt.AWTEventMulticaster.mouseReleased(AWTEventMulticaster.java:272)
[ ] at java.awt.Component.processMouseEvent(Component.java:6289)
[ ] at javax.swing.JComponent.processMouseEvent(JComponent.java:3267)
[ ] at java.awt.Component.processEvent(Component.java:6054)
[ ] at java.awt.Container.processEvent(Container.java:2041)
[ ] at java.awt.Component.dispatchEventImpl(Component.java:4652)
[ ] at java.awt.Container.dispatchEventImpl(Container.java:2099)
[ ] at java.awt.Component.dispatchEvent(Component.java:4482)
[ ] at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4577)
[ ] at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4238)
[ ] at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4168)
[ ] at java.awt.Container.dispatchEventImpl(Container.java:2085)
[ ] at java.awt.Window.dispatchEventImpl(Window.java:2478)
[ ] at java.awt.Component.dispatchEvent(Component.java:4482)
[ ] at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:644)
[ ] at java.awt.EventQueue.access$000(EventQueue.java:85)
[ ] at java.awt.EventQueue$1.run(EventQueue.java:603)
[ ] at java.awt.EventQueue$1.run(EventQueue.java:601)
[ ] at java.security.AccessController.doPrivileged(Native Method)
[ ] at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
[ ] at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:98)
[ ] at java.awt.EventQueue$2.run(EventQueue.java:617)
[ ] at java.awt.EventQueue$2.run(EventQueue.java:615)
[ ] at java.security.AccessController.doPrivileged(Native Method)
[ ] at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
[ ] at java.awt.EventQueue.dispatchEvent(EventQueue.java:614)
[ ] at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
[ ] at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
[ ] at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
[ ] at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
[ ] at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
[ ] at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
2014-07-01T18:12:38.793385 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:12:39.069412 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:12:39.345440 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:12:39.621467 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:12:39.897495 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:12:40.172523 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:12:40.448550 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:12:40.724578 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:12:41.000605 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:12:41.276633 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:12:41.552661 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:12:41.828688 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:12:42.103716 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:12:42.379743 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:12:42.655771 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:12:42.931798 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:12:43.207826 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:12:43.483854 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:12:43.759881 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:12:44.034909 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:12:44.310936 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:12:44.586964 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:12:44.862992 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:12:45.139019 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:12:45.415047 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:12:45.690074 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:12:45.966102 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:12:46.242129 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:12:46.518157 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:12:46.794185 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:12:47.070212 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:12:47.346240 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:12:47.621267 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:12:47.897295 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:12:48.173323 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:12:48.449350 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:12:48.725378 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:12:49.001405 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:12:49.277433 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:12:49.552460 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:12:49.828488 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:12:50.104516 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:12:50.380543 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:12:50.656571 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:12:50.932598 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:12:51.208626 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:12:51.483654 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:12:51.759681 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:12:52.035709 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:12:52.311736 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:12:52.587764 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:12:52.863792 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:12:53.139819 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:12:53.414847 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:12:53.690874 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:12:53.966902 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:12:54.242929 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:12:54.518957 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:12:54.794985 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:12:55.071012 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:12:55.346040 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:12:55.622067 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:12:55.898095 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:12:56.174123 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:12:56.450150 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:12:56.726178 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:12:57.002205 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:12:57.277233 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:12:57.553260 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:12:57.829288 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:12:58.105316 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:12:58.381343 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:12:58.657371 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:12:58.932398 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:12:59.208426 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:12:59.484454 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:12:59.760481 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:13:00.036509 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:13:00.312536 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:13:00.588564 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:13:00.863591 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:13:01.139619 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:13:01.415647 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:13:01.691674 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:13:01.967702 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:13:02.243729 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:13:02.519757 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:13:02.794785 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:13:03.070812 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:13:03.346840 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:13:03.622867 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:13:03.898895 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:13:04.174923 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:13:04.450950 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:13:04.725978 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:13:05.002005 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:13:05.278033 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:13:05.554060 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:13:05.830088 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:13:06.106116 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:13:06.382143 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:13:06.657171 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:13:06.933198 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:13:07.209226 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:13:07.485254 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:13:07.761281 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:13:08.037309 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:13:08.313336 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:13:08.588364 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:13:08.864391 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:13:09.140419 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:13:09.416447 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:13:09.692474 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:13:09.968502 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:13:10.244529 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:13:10.519557 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:13:10.795585 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:13:11.008606 tid1928 [IFO,App] Stop called in LivemodeTimer, true
2014-07-01T18:13:11.008606 tid1928 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2386, pl_exp_stop_cont failed
2014-07-01T18:13:11.035609 tid1928 [IFO,dev:SC10] 1
2014-07-01T18:13:11.071612 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:13:11.101615 tid1928 [IFO,Core] Error occurred. Device PMUSBCam00. Error in device Camera-1: Unknown error in the device.
2014-07-01T18:13:11.101615 tid1928 [IFO,App]
[ ] java.lang.Exception: Error in device Camera-1: Unknown error in the device. in Thread[Thread-56,6,main]
[ ] at mmcorej.MMCoreJJNI.CMMCore_stopSequenceAcquisition__SWIG_0(Native Method)
[ ] at mmcorej.CMMCore.stopSequenceAcquisition(CMMCore.java:913)
[ ] at org.micromanager.acquisition.LiveModeTimer.stop(LiveModeTimer.java:221)
[ ] at org.micromanager.acquisition.LiveModeTimer.stop(LiveModeTimer.java:199)
[ ] at org.micromanager.MMStudioMainFrame.enableLiveMode(MMStudioMainFrame.java:3891)
[ ] at spim.progacq.ProgrammaticAcquisitor.performAcquisition(ProgrammaticAcquisitor.java:286)
[ ] at spim.SPIMAcquisition$25.run(SPIMAcquisition.java:1776)
2014-07-01T18:13:11.347640 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:13:11.623667 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:13:11.899695 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:13:12.175723 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:13:12.450750 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:13:12.726778 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:13:13.002805 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:13:13.278833 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:13:13.496855 tid1928 [IFO,dev:SC10] 0
2014-07-01T18:13:13.512856 tid1928 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 1594,
2014-07-01T18:13:13.512856 tid1928 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 1596,
2014-07-01T18:13:13.512856 tid1928 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 125, pl_get_param ATTR_CURRENT
2014-07-01T18:13:13.512856 tid1928 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 160, pl_set_param
2014-07-01T18:13:13.512856 tid1928 [IFO,dev:Camera-1] Error code 32: The device can not set this property at this moment
[ ] In file: PVCAMUniversal.cpp, line: 1604,
2014-07-01T18:13:13.512856 tid1928 [IFO,Core] Error occurred. Device CMMCore::snapImage. Error in device Camera-1: The device can not set this property at this moment.
2014-07-01T18:13:13.512856 tid1928 [IFO,App]
[ ] java.lang.Exception: Error in device Camera-1: The device can not set this property at this moment. in Thread[Thread-56,6,main]
[ ] at mmcorej.MMCoreJJNI.CMMCore_snapImage(Native Method)
[ ] at mmcorej.CMMCore.snapImage(CMMCore.java:825)
[ ] at spim.setup.Camera.snapImage(Camera.java:27)
[ ] at spim.progacq.ProgrammaticAcquisitor.snapImage(ProgrammaticAcquisitor.java:242)
[ ] at spim.progacq.ProgrammaticAcquisitor.performAcquisition(ProgrammaticAcquisitor.java:435)
[ ] at spim.SPIMAcquisition$25.run(SPIMAcquisition.java:1776)
2014-07-01T18:13:13.528858 tid1928 [IFO,dev:SC10] 1
2014-07-01T18:13:13.554860 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:13:13.830888 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:13:14.106916 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:13:14.157921 tid2840 [IFO,App] Stop called in LivemodeTimer, false
2014-07-01T18:13:14.381943 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:13:14.657971 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:13:14.756981 tid1928 [IFO,App] Thread 103 (Thread-56) terminated with uncaught exception
2014-07-01T18:13:14.756981 tid1928 [IFO,App] java.lang.Error: Error acquiring!
2014-07-01T18:13:14.756981 tid1928 [IFO,App] at spim.SPIMAcquisition$25.run(SPIMAcquisition.java:1784)
2014-07-01T18:13:14.756981 tid1928 [IFO,App] Caused by exception:
2014-07-01T18:13:14.756981 tid1928 [IFO,App] java.lang.NullPointerException
2014-07-01T18:13:14.756981 tid1928 [IFO,App] at org.micromanager.utils.ImageUtils.makeProcessor(ImageUtils.java:98)
2014-07-01T18:13:14.756981 tid1928 [IFO,App] at spim.progacq.ProgrammaticAcquisitor.performAcquisition(ProgrammaticAcquisitor.java:443)
2014-07-01T18:13:14.756981 tid1928 [IFO,App] at spim.SPIMAcquisition$25.run(SPIMAcquisition.java:1776)
2014-07-01T18:13:14.933998 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:13:15.210026 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:13:15.486054 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:13:15.762081 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:13:16.037109 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:13:16.313136 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:13:16.589164 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:13:16.865191 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:13:17.141219 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:13:17.417247 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:13:17.693274 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:13:17.968302 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:13:18.244329 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:13:18.520357 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:13:18.642369 tid6872 [IFO,App] Stop called in LivemodeTimer, true
2014-07-01T18:13:18.796385 tid1988 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 2475, pl_exp_get_latest_frame_ex
2014-07-01T18:13:18.853390 tid6872 [IFO,dev:Camera-1] PVCAM API error: "C2_PVCAM_NOT_INITED The PVCAM library was never initialized", code: 21
[ ] In file: PVCAMUniversal.cpp, line: 654, pl_cam_close
2014-07-01T18:13:19.062411 tid6872 [IFO,Core] All devices unloaded.
2014-07-01T18:13:19.062411 tid6872 [IFO,Core] System reset.
2014-07-01T18:13:19.062411 tid6872 [IFO,Core] Core session ended
More information about the OpenSPIM
mailing list