<font size=2 face="sans-serif">Hi Neil,</font>
<br>
<br><font size=2 face="sans-serif">About the changes made to our OpenSPIM
setup at Fraunhofer IPT, there are two main changes:</font>
<br>
<br><font size=2 face="sans-serif">*The redesign of the sample arm of the
4D Stage so that a timing belt and timing pulleys can be used instead</font>
<br><font size=2 face="sans-serif">of the round belt and pulleys included
with the 4D Stage. This was done because a slip between the belt</font>
<br><font size=2 face="sans-serif">and pulleys was identified causing inaccuracies
when rotating the sample. I don't know if someone else had this issue,
</font>
<br>
<br><font size=2 face="sans-serif">*The redesign of the sample chamber
so that the temperature of the medium can be controlled. For doing that
a </font>
<br><font size=2 face="sans-serif">PT100 special for liquids, TO220 resistors
and a PID controller were employed. The sample chamber had to</font>
<br><font size=2 face="sans-serif">be built out of stainless steel so that
 corrosive effects due to the sample medium can be avoided.</font>
<br>
<br><font size=2 face="sans-serif">I can provide you the drawings and the
CAD files, also the part number and manufacturer of the components that</font>
<br><font size=2 face="sans-serif">were used,  just let me organize
the information accordingly.</font>
<br>
<br><font size=2 face="sans-serif">I think that would make sense to make
this information available through the OpenSPIM wiki so that eveyone can
use it if interested. </font>
<br><font size=2 face="sans-serif">At the same time I could have a feedback
about the changes I made and further improvements can be done to the design.
What is </font>
<br><font size=2 face="sans-serif">the opinion of all?</font>
<br>
<br><font size=2 face="sans-serif">Best regards,</font>
<br><font size=2 face="sans-serif">Edgar</font>
<br>
<br>
<br>
<table>
<tr valign=top>
<td colspan=3><font size=2 face="sans-serif">__________________________________________<br>
<br>
Fraunhofer-Institut für Produktionstechnologie IPT<br>
Edgar Escobar Nieto </font>
<br>
<br><font size=2 face="sans-serif">Steinbachstraße 17</font>
<br><font size=2 face="sans-serif">52074 Aachen</font>
<br><font size=2 face="sans-serif"><br>
edgar.escobar.nieto@ipt.fraunhofer.de</font>
<br><a href=http://www.ipt.fraunhofer.de/><font size=2 face="sans-serif">http://www.ipt.fraunhofer.de</font></a>
<br><font size=2 face="sans-serif">__________________________________________</font>
<tr valign=top>
<td>
<td>
<td></table>
<br>