<font face="Default Sans Serif,Verdana,Arial,Helvetica,sans-serif" size="2">
 <span>Dear Jan,<br><br>I already read the manual of the PID temperature controller and also has Solid State Relay output. When using the proportional<br>
control mode, the output is a kind of a on-off switching, but controlling the percentage of time the output is on and off for every cicle.<br>
<br>"Proportional controls are designed to eliminate the cycling associated with on/off control. A proportional controller<br>
decreases the average power being supplied to the heater as the temperature approaches setpoint.<br>
This has the effect of slowing down the heater so that it will not overshoot the setpoint, but will approach the setpoint<br>
and maintain a stable temperature. This proportioning action can be accomplished by turning the output on and off for <br>
short intervals. This “time proportioning” varies the ratio of “on” time to “off” time to control the temperature".<br>
<br>Since my aim is to integrate the temperature control in the easier way I will use this PID temperature controller and<br>
the PT100 sensor. <br><br>Thanks a lot for your feedback.<br><br>Kind regards,<br>
Edgar<br><table border="0" cellpadding="0" cellspacing="0" width="457,5">
<tbody><tr><td colspan="3"><font face="sans-serif" size="2">_________________________________________________________________________<br>
<br>Fraunhofer-Institut für Produktionstechnologie IPT <br>Edgar Escobar Nieto  <br>
 <br><br> <br> <br>Steinbachstraße 17 <br>52074 Aachen <br><br>edgar.escobar.nieto@ipt.fraunhofer.de </font>
<font color="blue" size="3"><u><br></u></font><a href="http://www.ipt.fraunhofer.de/">
<font color="blue" face="sans-serif" size="2"><u>http://www.ipt.fraunhofer.de</u>
</font></a><font face="sans-serif" size="2"><br>_________________________________________________________________________</font>
<br></td></tr><tr><td valign="top" width="225"><br></td><td width="7,5">
<br></td><td valign="top" width="225"><br></td></tr></tbody></table></span>
<br><br><font color="#990099">-----"Krieger, Jan" <j.krieger@Dkfz-Heidelberg.de> schrieb: -----</font>
<div style="padding-left:5px;"><div style="padding-right:0px;padding-left:5px;border-left:solid black 2px;">
An: "edgar.escobar.nieto@ipt.fraunhofer.de" <edgar.escobar.nieto@ipt.fraunhofer.de><br>
Von: "Krieger, Jan" <j.krieger@Dkfz-Heidelberg.de><br>Datum: 21.09.2013 12:38<br>
Betreff: AW: Temperature control for the SPIM chamber<br><br><div><font face="Courier New,Courier,monospace" size="2">
Dear Edgar!<br><br>I would opt for the third one, as the first two will only do on-off regulation. The third one has a proper PID loop and the temperature will be more stable. Also it has an input for 3-wire PT100 (the others only NTCs), which is by far more exact and has wire-length correction, so you will have a very accurate temperature measurement. What I'm not so sure about (but also have no experience): It also seems to have a relais (i.e. on-off switching)  as output, not a linear output, so the regulator will heat in pulses, not continuously ... but maybe that won't harm, as you heat a lot of metal anyways, which will maybe damp away such pulses ;-)<br>
<br>I built my own controller ... but more out of interest, as the cost is more in the EUR100 range + work ;-)<br>
It has a 4-wire PT100 input and a microcontroller + display + USB for control. The output is a MOSFET that can directly drive a resistor for heating with a PWM signal, so it can also provide a little heating power to keep a given temperature. The pro-side is that our SPIM-control software can control the device over USB and log the temperature during any measurement. The down side: the circuit is a little complicated and the PCBs carry a lot of standard SMD parts (which are not so easy to solder for non-experienced people).<br>
<br>cu<br>JAN<br><br><br>Dipl.-Phys. Jan Krieger<br>German Cancer Research Center (dkfz)<br>
Department B040 - Biophysics of Macromolecules (Prof. J. Langowski)<br>
Im Neuenheimer Feld 580<br>69120 Heidelberg<br><br>fon: +49 / 6221 / 42-3395<br>
fax: +49 / 6221 / 42-3391<br>e-mail: j.krieger@dkfz.de<br>www: <a href="http://www.dkfz.de/Macromol/">
http://www.dkfz.de/Macromol/</a><br>________________________________________<br>
Von: edgar.escobar.nieto@ipt.fraunhofer.de [edgar.escobar.nieto@ipt.fraunhofer.de]<br>
Gesendet: Freitag, 20. September 2013 14:59<br>An: Krieger, Jan<br>Cc: openspim@openspim.org<br>
Betreff: Re: Temperature control for the SPIM chamber<br><br>Dear Jan,<br>
<br>Thanks a lot for the information, it is very helpful.<br><br>I have seen that there are on internet some temperature controllers for ca. $25<br>
<a href="http://www.ebay.de/itm/All-purpose-Temperature-Controller-STC-1000-Whit-sensor-/320628773067">
http://www.ebay.de/itm/All-purpose-Temperature-Controller-STC-1000-Whit-sensor-/320628773067</a>
<br><a href="http://www.autospeed.com/cms/A_112617/article.html">http://www.autospeed.com/cms/A_112617/article.html</a>
<br><br>or this one that looks more complex<br><a href="http://www.auberins.com/index.php?main_page=product_info&cPath=1&products_id=14">
http://www.auberins.com/index.php?main_page=product_info&cPath=1&products_id=14</a>
<br><br>but I don't know if these kind of controllers are suitable for our application.<br>
<br>The advantage of this ones is that I wouldn't need to build the circuit for conditioning the<br>
signal for the PT100 sensor and avoid writting a program for controlling the temperature.<br>
So the temperature control would be independent.<br><br>What's your opinion?<br>
<br>Kind regards,<br>Edgar<br>_________________________________________________________________________<br>
<br>Fraunhofer-Institut für Produktionstechnologie IPT<br>Edgar Escobar Nieto<br>
<br><br><br><br>Steinbachstraße 17<br>52074 Aachen<br><br>edgar.escobar.nieto@ipt.fraunhofer.de<br>
<a href="http://www.ipt.fraunhofer.de">http://www.ipt.fraunhofer.de</a>
 <<a href="http://www.ipt.fraunhofer.de/">http://www.ipt.fraunhofer.de/</a>
><br>_________________________________________________________________________<br>
<br><br><br><br><br><br><br>-----Jan Krieger <j.krieger@dkfz-heidelberg.de> schrieb: -----<br>
An: "edgar.escobar.nieto@ipt.fraunhofer.de" <edgar.escobar.nieto@ipt.fraunhofer.de><br>
Von: Jan Krieger <j.krieger@dkfz-heidelberg.de><br>Datum: 19.09.2013 18:12<br>
Betreff: Re: Temperature control for the SPIM chamber<br><br>Hi!<br><br>
I'm attatching a picture of our chamber ... if that helps ;-) ... Have<br>
you already decided on a temperature controller? As I mentioned before,<br>
we have a homebuilt one and I'm using these PT100 to embed into the<br>
sample chamber:<br><a href="http://www.conrad.biz/ce/de/product/171961/Platin-Temperatursensor-in-Keramikhuelse-Heraeus-MR828-Heraeus-Nr-32-209-340-70-500-C-Keramikhuelse">
http://www.conrad.biz/ce/de/product/171961/Platin-Temperatursensor-in-Keramikhuelse-Heraeus-MR828-Heraeus-Nr-32-209-340-70-500-C-Keramikhuelse</a>
<br><br>For measurement in the chamber I found thin PT100 from stainless steel:<br>
<a href="http://www.temperaturmesstechnik.de/fileadmin/user_upload/pdf/tmh-mantelwiderstandsthermometer-001.pdf">
http://www.temperaturmesstechnik.de/fileadmin/user_upload/pdf/tmh-mantelwiderstandsthermometer-001.pdf</a>
<br>... but they are rather expensive (~55EUR+VAT)<br><br>About the foil: The ones I found a few years ago were all very large ...<br>
if you find a small one, please let me know ;-)<br><br>Best,<br>JAN<br>
<br><br><br><br>Am 19.09.2013 13:49, schrieb edgar.escobar.nieto@ipt.fraunhofer.de:<br>
> Dear Jan,<br>><br>> Thanks for your feedback. So I will use the TO22 housing resistor<br>
> and the PT100 temperature sensor. Or maybe instead of the<br>> TO22 housing resistor I will use a heating foil (also a resistor).<br>
><br>> Kind regards,<br>> Edgar<br>> _________________________________________________________________________<br>
><br>> Fraunhofer-Institut für Produktionstechnologie IPT<br>> Edgar Escobar Nieto<br>
><br>><br>><br>><br>> Steinbachstraße 17<br>> 52074 Aachen<br>
><br>> edgar.escobar.nieto@ipt.fraunhofer.de _<br>> __http://www.ipt.fraunhofer.de_ < <a href="http://www.ipt.fraunhofer.de/">
http://www.ipt.fraunhofer.de/</a>><br>> _________________________________________________________________________<br>
><br>><br>><br>><br><br><br><br>[Anhang 'SPIM_manual_poster.pdf' entfernt von Edgar Escobar Nieto/Fraunhofer IPT]<br>
[Anhang 'j_krieger.vcf' entfernt von Edgar Escobar Nieto/Fraunhofer IPT]<br>
</font></div></div></div><div></div></font>